Laminate Kitchen Cabinet Doors

Cabinet Resurfacing

It is finally time to do something about those old, worn out cabinets but you do not have the money to cover the cost of an all out replacement of the cabinets. If that is you then what you need is cabinet resurfacing. Cabinet resurfacing is the process of covering up the surfaces of the existing cabinets with wood veneer.

Before you decide to do a cabinet resurfacing, you need to thoroughly examine your existing cabinets to be sure that they are in good condition. If there is no structural fault and you are fine with the current design then by all means, go ahead with the cabinet resurfacing.

Next you need to determine what you want from the cabinet resurfacing. Deciding whether you merely want a different look or if you want to update the cabinets by giving them a more upscale appearance would help you in choosing what form your resurfacing job should take.

Conduct a thorough research either in home improvement magazines or online so that you have a good idea of what you want your cabinets to look like when you are through. Jumping into the project without a clear idea of what you want to be the outcome could cause you confusion and wastage in terms of money and time.

Having a clear idea of what you want for your cabinet resurfacing would also help you to plan your budget which is the next important step. To do this, you could confer with friends and family that have recently done a cabinet resurfacing. Find out how an estimated cost of what they spent. You could also consult a licensed cabinet resurfacing expert for an idea of what your budget should look like.

To further aid your budgeting, contact different cabinet resurfacing companies located near you or cabinet makers and ask them for a cost estimate. If necessary, allow them to get a thorough and detailed look at your cabinet then give you a quotation on what it would take to do a resurfacing. You can then compare pricing and services before you make your decision.

Once your budget is all prepared and you have screened the different cabinet resurfacing companies, you can then pick the company of your choice to work with. Make sure that you are able to communicate clearly with them and that they understand your vision for your cabinet. Preferably, work with them each step of the way, from design to completion. That way there is little room for misunderstandings or unsatisfactory work.

An important part you should not neglect is to research the cabinet resurfacing company before you make any firm commitment to work with them. They should have a stellar reputation for delivering quality work on time.

It is possible to remodel your cabinets and have them looking elegant and upscale without spending a lot of money. Cabinet resurfacing will give you great looking cabinets in less time than it would take to replace the old ones and for less money.

About the author: Shawn Hickman is the Sears Marketing Manager for Sears Home Improvements. If you need more information on Cabinet Resurfacing , visit the Kitchen Remodeling sections of the Sears Home Services website.

Source: http://www.articlesbase.com/remodeling-articles/cabinet-resurfacing-4039795.html

Frequently Asked Questions

1. QUESTION:
   How to remove the taping on the edges of laminate kitchen cabinet doors?
   Some of it has worn off and there is still sticky adhesive left. I want to remove what is left of the old and put on new.
   
   • ANSWER:
     To remove the remaining molding, us a hot iron and a pair of pliers. Heat and pull.